1.Large screen(128×64 dot matrix LCD), showing all functions and parameters.
2. Test at any angle, even upside down.
3.Support "forged steel (Steel)" material, when using the D/DC impact device test "forged" sample, can read HB value directly, without the need for manual checking table.
4. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL and three types of strength values immediately.
5. Seven impact devices are available for special application. Automatically identify the type of impact devices.
6. Large capacity memory could store 600 groups (Relative to average times32~1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.

7.Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
8. Battery information indicates the rest capacity of the battery and the charge status.
9. User calibration function.
10. USB port with the PC humanity multi-functions data proceeding software.
11. Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
12. NI-MH rechargeable battery as the power source. Charge circuit integrated inside
13. Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
14. Large screen LCD, showing all functions and parameters.With EL background light.
15.Seven impact devices are available for special application. Automatically identify the type of impact devices.
16. Test at any angle, even upside down.
17.Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
18. Large memory could store 100 groups (Relative to average times 32~1 ) information including single measured value, mean value, impact direction, impact times, material and hardness scale etc.

1. Battery information showing the rest capacity of the battery and the charge status.
2. User calibration function.
3. Software to connect to PC via USB port.
4. Thermal printer integrated, convenient for in field printing.
5. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing). Outline dimensions:210 x 85 x 45mm (host)